Dimensions; Weight; Connecting Your Uc1 Hardware; Usb Cables - Solid State Logic SSL UC1 User Manual

Hide thumbs Also See for SSL UC1:

Table of Contents

Get-Started

UC1 Physical Specification

Dimensions

11.8 x 10.5 x 2.4 " / 300 x 266 x 61 mm (Width x Depth X Height)

Unboxed - 2.1 kg / 4.6 lbs

Boxed - 4.5 kg / 9.9 lbs

Safety Notices

Please read the Important Safety Notices at the end of this User Guide before use.

1. Connect the included power supply to the DC socket on the connector panel.

2. Connect one of the included USB cables from your computer to the USB socket.

Power Supply

Please use one of the provided USB cables ('C' to 'C' or 'C' to 'A') to connect UC1 to your computer. The type of USB port you

have available on your computer will determine which of the two included cables you should use. Newer computers may have 'C'

ports, whereas older computers may have 'A'. Please ensure that you are connecting to the port labelled USB on UC1, which is

a 'C' type connection.

UC1 Connector Panel

C to C / C to A

USB Cable

SSL UC1 User Guide

Table of Contents

Do you have a question about the SSL UC1 and is the answer not in the manual?