Table of Contents
Advertisement
Product Overview & Features
Follow DAW Track Selection
Synchronisation of the selected DAW track and the Plug-in Mixer is available for the following DAWs currently:
•
Ableton Live
•
Studio One
•
REAPER
You must be using SSL 360° v1.4 or higher. Also, if using Channel Strip 2, you must be using V2 or higher in the VST3 format.
SOLO, CUT & SOLO CLEAR
In some DAWs, the SOLO and CUT buttons directly control the DAW's Solo and Mute buttons. In others, the soloing system is
independent.
SOLO AND CUT linked to DAW
(Must use VST3 format)
Live
Studio One
REAPER
For DAWs whereby the SOLO and CUT integration is independent (not linked to the DAW), this is how it works:
SOLO - Cuts the output of all other channel strip plug-ins in the session.
CUT - Cuts the output of the channel strip plug-in.
SAFE - Prevents the plug-in from being cut in response to another channel strip in
the session having its SOLO activated. Useful for when channel strips are inserted
onto Aux/Bus tracks within the session. This button does not function in DAWs where
SOLO and CUT are linked to the DAW.
Recommended Workflow when SOLO and CUT are independent of DAW:
1.
Insert a channel strip plug-in on all tracks in your DAW session.
2.
Make sure to engage the SOLO SAFE button on channel strips that have been
inserted onto Auxes/Busses/Sub Groups/Sub Mixes. This will ensure that you
hear individual instruments that are routed to these destinations when you start
soloing.
SOLO SAFE prevents a channel strip from being cut when another channel strip's SOLO is activated.
SOLO CLEAR
Clears any active channel strip solos.
This button does not function for DAWs where SOLO and CUT are linked to the DAW.
30
SOLO AND CUT independent of DAW
Pro Tools
Logic Pro
Cubase/Nuendo
SOLO CLEAR
BUTTON
SSL UC1 User Guide
Advertisement
Table of Contents
