Transport Control; Introduction - Solid State Logic SSL UC1 User Manual

Transport Control

Introduction

Transport control from UC1 and the Plug-in Mixer.
Please note, these Transport commands are powered by HUI/MCU
commands, so therefore you must follow the Setup instructions
on the pages that follow for the Transport control to work. For
more information on the operation of Transport controls from the UC1
front panel TRANSPORT
Transport Bar - Buttons
You can access the following DAW Transport commands:
• Rewind
• Forward
• Stop
• Play
• Record
• Loop
Transport Bar - Display Readout
Pro Tools
The format is determined by what is currently set in Pro Tools itself and cannot be changed from the Plug-in Mixer. The counter will
display one of the following formats:
• Bars/Beats
• Mins:Secs
• Timecode
• Feet+Frames
• Samples
MCU DAWs
In Logic, Cubase, Live, Studio One, and LUNA the Plug-in Mixer
Transport counter can display a choice of the following formats:
• Bars/Beats
• SMPTE or Min:Secs Time*
*The format is determined by the DAW Host
SSL UC1 User Guide
mode, click the link.
The Plug-in Mixer Transport Bar
UC1 front panel Transport Control
The Transport Bar Buttons
In MCU DAWs (Logic/Cubase/Studio One) you can toggle
between Bars/Beats by clicking with the mouse in the
display area, or by triggering the SMPTE/BEATS MCU
command on UF8.
Product Overview & Features
33