Transport - Solid State Logic SSL UC1 User Manual

Product Overview & Features

Transport

You can control the DAW's Play and Stop commands, as well as the playhead cursor from the front panel of UC1. The Transport
functionality from UC1/Plug-in Mixer is achieved using HUI/MCU commands. In order for this to function, you must configure a HUI/
MCU controller in your DAW, as well as configuring which DAW is driving the Transport in the CONTROL SETUP tab of SSL 360°.
Please follow the instructions in the Plug-in Mixer Transport Setup section if you want to use TRANSPORT
Mode on UC1.
1 - Ensure you are in Bus Comp mode and then simply press the Secondary Encoder to enter/exit TRANSPORT mode.
2 - Turning the Secondary Encoder will allow you to navigate the playhead cursor forwards/backwards along the DAW's timeline.
3 - The BACK button becomes the STOP command.
4 - The CONFIRM button becomes the PLAY command.
2
1
3 4
Connector Panel
The recessed section hosts UC1's connectors.
2
1
1 - DC Connector
Use the included DC Power Supply to provide power for your UC1.
2 - USB - 'C' Type Connector
Connect one of the included USB cables from your computer to the USB port on UC1. This handles all of the communication
between the plug-ins and UC1, via the SSL 360° software application.
SSL UC1 User Guide
20