Solid State Logic SSL UC1 User Manual page 25

Product Overview & Features
4 - Firmware Updates Area
If a firmware update becomes available for your UC1 unit, then an Update Firmware button will appear below the unit. In the
screenshot shown no update is available, so no button is presented. If present, click on the button to start the firmware update
process, being sure to not disconnect the power or USB cable(s) whilst it is in progress.
5 - UC1 Bus Compressor Meter Calibration
Clicking the Meter Cal. button will launch the UC1 Bus
Compressor Meter Calibration Tool.
This tool will enable you to (if necessary) calibrate the
physical Bus Compressor meter, so that it closely matches
the Bus Compressor 2 plug-in.
For each calibration marking use the - and + buttons to move
the Bus Compressor meter on the UC1 hardware, until it lines
up closely with the marking.
The calibration is saved automatically onto the UC1
hardware.
6 - Sleep Settings / UC1 Screen-saver
Clicking this will open a pop-up window that allows you to determine
the length of time before your connected 360° control surfaces go into
Sleep mode. Simply click your mouse in the green digit area and type
a number between 1 and 99. To force a control surface out of sleep
mode, press any button or move any control on the surface itself. You
can untick the box to disable Sleep mode.
7 - SSL Socials
The bar at the bottom has quick links to the SSL website, Support section and SSL Socials.
8 - About
Clicking this will open a pop-up window detailing software licensing relating to SSL 360°.
9 - Export Report
Should you encounter any issues with your SSL 360° software or control surfaces, you may be asked by a support agent to use
the EXPORT REPORT feature.
This feature generates a text file containing essential information about your computer system and UF8(s)/UC1, alongside technical
log files relating to SSL 360° activity, which may help to diagnose any issues. When you click EXPORT REPORT, you'll be asked
to choose a destination on your computer to export the generated .zip file to, which you can then forward on to the support agent.
SSL UC1 User Guide
25