Bus Compressor Meter; Solo And Cut Buttons - Solid State Logic SSL UC1 User Manual

Product Overview & Features

Bus Compressor Meter

The most striking aspect of the UC1 front panel is the inclusion of a genuine moving-
coil gain reduction meter. This shows the gain reduction activity of the selected Bus
Compressor 2 plug-in. The meter is driven digitally from the plug-in and provides a
helpful way of being able to keep an eye on compression activity, even with the Plug-in
GUI closed.
The Bus Compressor meter

SOLO and CUT Buttons

The SOLO and CUT buttons apply to the selected channel
strip instance being controlled by UC1.
In some DAWs, the SOLO and CUT buttons directly control
the DAW's Solo and Mute buttons. In others, the soloing
system is independent.
SOLO, CUT and FINE controls in the bottom-right of UC1
SOLO AND CUT linked to DAW SOLO AND CUT independent of DAW
Live Pro Tools
Studio One Logic Pro
REAPER Cubase/Nuendo
Please go to Page 22 for more information on the soloing system
SOLO CLEAR
Clears any active Channel Strip solos.
Please note: This button does not function for DAWs where SOLO and CUT are linked to the DAW.
FINE BUTTON
FINE - puts all front panel Channel Strip and Bus Compressor rotary controls into a finer resolution, for mix critical tweaks. This can
be latched or held for a momentary action.
SSL UC1 User Guide
16