Adding/Removing Channel Strips To The Plug-In Mixer; Channel Strip 2 Ordering In The Plug-In Mixer - Solid State Logic SSL UC1 User Manual

Zoomed Out View
• Easy to navigate from one end of the Plug-in Mixer to the other.
• Gives you a 'bird's eye' view of the mix.
• In DAWs that allow manual re-ordering, it allows you to re-arrange your Channel Strips by clicking and dragging in the track
name area.
• The +/- 20 dB Output Trim parameter is placed onto a fader.
You cannot change the Channel Strip processing order from Zoomed Out View
Zoomed In View
• Allows you to get into the detail of tweaking settings with precision.
• Allows access to alter Channel Strip Routing at the top.
• Allows access to SOLO SAFE and Sidechain Listen at the bottom.
You cannot re-order tracks (if DAW allows manual re-ordering) from Zoomed In View

Adding/Removing Channel Strips to the Plug-in Mixer

Plug-ins are automatically added to the Plug-in Mixer when you instantiate
them in the DAW session. Deleting a plug-in in the DAW session will remove
it from the Plug-in Mixer.

Channel Strip 2 Ordering in the Plug-in Mixer

The way in which the the Plug-in Mixer works varies slightly between DAWs.
All supported DAWs allow the DAW track name to be 'pulled through' so
that the Channel Strip can be labelled, however, the way in which Channel
Strips are ordered in the Plug-in Mixer depends on the DAW:
DAW
Pro Tools
Logic 10.6.0 and below
Logic 10.6.1 and above
Cubase/Nuendo
Live
Studio One
REAPER
Instantiation Time + Manual
For DAWs that fall into this category, Channel Strips are added sequentially to
the Plug-in Mixer, based on when they were inserted into the DAW session. You
can re-order Channel Strips in the Plug-in Mixer by clicking and dragging in
the track name area.
Automatic
For DAWs that fall into this category, the ordering of Channel Strips in the Plug-in
Mixer will dynamically follow the order of the tracks in your DAW session. You
cannot manually re-arrange Channel Strips in this mode.
SSL UC1 User Guide
Plug-in Mixer Ordering
Instantiation Time + Manual
Instantiation Time + Manual
Automatic (must use VST3s)
Automatic (must use VST3s)
Automatic (must use VST3s)
Automatic (must use VST3s)
Automatic (must use VST3s)
Product Overview & Features
Position in
Plug-in Mixer
The position of the Channel Strip in the
Plug-in Mixer is shown at the top
Click and drag in the track name area
to re-order in non-automatic DAWs (Pro
Tools and Logic 10.6.0 and below)
33