Cubase - Solid State Logic SSL UC1 User Manual

Hide thumbs Also See for SSL UC1:

Table of Contents

Product Overview & Features

Cubase

STEP 1: Open Cubase. Go to Studio > Studio Setup... Click the

+ symbol in the top-left of the window and select Mackie Control

from the drop-down list. Set the MIDI Input to SSL V-MIDI Port 1

Source and set MIDI Output to SSL V-MIDI Port 1 Destination.

Click Apply.

STEP 2: Next, go to Studio Setup > MIDI Port Setup and

deactivate (un-tick) the In 'ALL MIDI Inputs' option for your SSL

V-MIDI Ports and click OK. This will ensure that MIDI Instrument

Tracks set to receive from ALL MIDI Inputs do not pickup MIDI

data.

STEP 3: In SSL 360° on the CONTROL SETUP page configure

DAW 1 as Cubase from the drop-down list and also select DAW 1

STEP 1 : Go to Studio > Studio Setup. Add a Mackie

(Cubase) in the TRANSPORT LINKED TO list below.

Control and configure the MIDI Input to SSL V-MIDI

Port 1 Source and MIDI Output to SSL V-MIDI Port 1

Destination.

STEP 2 : Disable (un-tick) In 'ALL MIDI Inputs' for SSL V-MIDI Ports

STEP 3 : On the CONTROL SETUP tab, set DAW 1 to Cubase in DAW CONFIGURATION and also set TRANSPORT

LINED TO as DAW 1 (Cubase).

SSL UC1 User Guide

Table of Contents