Roland DXY-1300 Command Reference Manual page 15

X-y plotter
Table of Contents

Advertisement

c
FORMAT
Cx,y,r,01,02 (,0d)
PARAMETER RANGE
x,y,r
:
-3 2 7 6 8 .0 0 0 0 to 32767.4999
01,02 : - 32767° to +3 27 6 7°
0d
:
1° to 179.9999°
RELATED COMMANDS
L, B, ^ LT
EXPLANATION
Draws circles and arcs centered on the specified coordinates (x,y). Parameter r is the radius of
the circle or arc. x,y, and r must be within the range - 32768.0000 to +32767.4999. 01 is the
start angle and 02 is the completion angle, and 01 and
+ 3 2 7 6 7 °. The "+ " sign may be omitted.
<02
When 01
the circle or arc is drawn counterclockwise, and when 01 > 02 the circle or arc is
drawn clockwise.
Specification of the parameter 0d enables the drawing of a polygon. 0d must be in the range 1°
to 179.9999°, so that specification of 0d as 60° will result in the drawing of a hexagon, and
specification as 45° will result in the drawing of an octagon. When 0d is omitted, the default
value is 5°. When a large circle or arc is drawn, specification of 0d as 5° or less permits drawing
of a circle or arc with higher resolution.
0d is changed to an integer in order to divide (0 1 -0 2 ) equally.
EXAMPLE
10 ' *** "C" COMMAND ***
" C 5 0 0 , 1 5 0 0 , 3 0 0 , 0 , 3 6 0 "
20 L P R IN T
30 L P R I N T
" C 5 0 0 , 1 5 0 0 , 2 0 0 , 3 6 0 , 0 "
4 0 L P R IN T
" H "
50 END
Circle
Fig.
02
must be in the range - 32767° to
(01 < 02:Counterclockwise)
(01 > 02:Clockwise)
Line 20
C-1
2-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxy-1200Dxy-1100

Table of Contents