Roland DXY-1300 Command Reference Manual page 95

DEFAULT VALUE
"PT 0.3;"
EXPLANATION
Parameters are specified in mm. If the pen thickness is not specified, a value of 0.3mm is set.
The PT command is valid only for the pen in use.
When the SP command is executed, the set value is ignored and the pen thickness is set at the
default value of 0.3mm until it is set by the next PT command.
EXAMPLE
' *** SHADING SAMPLE ***
1 0 0
LPRINT "SP1;FT1
1 1 0
20
LPRINT "
1
"RA1000,1000;"
LPRINT
1 30
RA
FORMAT
RA X.Y [terminator] •
• PARAMETER RANGE
-3 2 7 6 8 .0 0 0 0 to +32767.4999
EXPLANATION
Hatches the inside of a rectangle whose diagonal has been specified with the X and Y coor
dinates. Hatching begins from the current pen position.
, 0 , 0 ;
"
PT0 . 3 ; "
Rectangle Absolute
(
1000 1000
,
Fig. PT- 1
3-51
)