Roland DXY-1300 Command Reference Manual page 22

EXAMPLE
10 ' * ** "J" C O M M A N D
FOR I=1 TO
2 0
30 LPRINT "J";I
40 LPRINT "M0,";I*100
50 LPRINT "I1000,0":LPRINT "P PEN No.";I
60 NEXT I
70 LPRINT "J0"
*Each pen draws a straight line.
K
©FORMAT
K n , l 1, l 2
PARAMETER RANGE
n : - 9101 to +9101
l 1, l 2 : -3 2 7 6 8 .0 0 0 0 to 32767.4999
RELATED COMMAND
A, G, L, B, ^ LT
EXPLANATION
Draws segment and indication lines for circles and arcs drawn with the A and G commands.
This command is only valid when the A command has been executed.
Parameter n specifies the angle for the
one revolution being equivalent to 100% (360° ). Specification must be within the range
- 9101% to +9101% . The "+" sign may be omitted.
Specification of parameter n as a positive value results in the lines being drawn clockwise, and
specification as a negative value results in the lines being drawn counterclockwise, from the out­
side to the inside of the circle and of the specified length.
Parameter l 1 specifies the distance of the end of the segment o r indication lines from the
center and must be in the range -3 2 7 6 8 .0 0 0 0 to +32767.4999.
***
S
Fig. J-1
A + %
segment
line, the top of the circle being 0% (90° ) and
2-12
PEN No. 8
PEN No.
7
PEN No. 6
PEN No. 5
PEN No. 4
PEN No. 3
PEN No. 2
PEN No. 1