Roland DXY-1300 Command Reference Manual page 31

Q
FORMAT
Qn
PARAMETER RANGE
0 to 3
DEFAULT VALUE
"Q0"
RELATED COMMANDS
, ^ D I
^ D R
EXPLANATION
Sets the drawing angle for characters drawn with the " P" and " N" commands. The parameter n
must be an integer between 0 and 3. If a value outside this range is specified, it is ignored and
the previously specified angle remains valid.
The initial value is n = 0 .
The character drawing angles are as follows.
(Default value)
When the drawing angle is set with this command, it is valid until it is set again or power is
switched OFF.
EXAMPLE
10 ' *** "Q" COMMAND
20 FOR I=0 TO 3
30 LPRINT "Ml500,1500"
4 0 L P R IN T
50 LPRINT
60 NEXT I
7 0 L P R IN T " Q 0 "
8 0 L P R IN T " H "
Alpha Rotate
0°
" Q " ; I
Roland"
" P
Fig. Q-1
Sets the drawing angle for characters.
Returns to the default value.
2-21
n = 3