Coordinates - Roland DXY-1300 Command Reference Manual

1.3 Coordinates

In the coordinate system of Fig. 1-3, the longer side of the paper is the X axis the shorter side is
the Y axis. A single point on a plane is designated by the values assigned to X and Y, such as
1000 2 0 0 0
( , ).
approx. 10mm
The maximum plotting area (the area where plotting is possible) varies depending on the paper
size standard and paper size setting, which are both set with the DiP switches, and the expand
mode selection.
When selecting the DXY-GL commanads by DIP switch, the size of the maximum plotting area in
plotter coordinate units (0.1mm or 0.025mm) does not change, but the units will be different.
SO
I
ANSI
approx 15mm
15.0mm
Fig. 1-3
Fig. 1-4
1-3
0.025mm unit
0
A3 (16158.11040) (4039,2760)
0.025mm unit 0 . 1mm unit
A4 (11040,7721)
(2760, 1930)
0 025mm unit
0 .1mm unit
(16640,10365)
(4160,2591)
0.025mm unit 0 . 1mm unit
(10365,7962)
(2591,1990)
. 1mm unit