Roland DXY-1300 Command Reference Manual page 37

X
FORMAT
Xp,q,r
PARAMETER RANGE
p : 0,1
q : -3 2 7 6 8 .0 0 0 0 to +32767.4999
r : 1 to 32676.4999
EXPLANATION
Draws from the current pen position.
The Y coordinate axis is specified with p= 0 and the X coordinate axis with p = 1. If parameters
other than 0 or 1 are specified, an error occurs.
q is used to specify the intervals on the scale and is a numeric value between — 32768.0000 and
+ 32767.4999. r specifies the number of times the scale is to be drawn and is a numeric value
between 1 and 32767.4999. Both q and r are rounded up or down to the nearest integer.
If a negative value is specified for q, the coordinate axis is drawn in the negative direction (when
p = 0 the scale is drawn downwards from the current pen position, when p — 1 the scale is drawn
leftwards from the current pen position).
The length of the graduation ticks is 2mm regardless of the plotter units selected by the DIP
switch. Naturally, any portions that extend beyond the plotting area will not be drawn, so please
exerise care.
Axis
Number of repeats r
Fig. X-1
2-27
2mm