Roland DXY-1300 Command Reference Manual page 109

EXAMPLE
*** "UC
'
10
2 0 OPEN "LPT1:" AS #1
30 PRINT
4 0 PRINT #1, "LBABC ";CHR$(3 )
PRINT #1, "UC0,2 ,99,0,4,6,0,0,2,3
50
0 ;"
; 1 ,
c p
60 PRINT #1, "LBDEF ";CHR$(3)
70 PRINT #1, "SP0;"
VS
FORMAT
VS pen speed [terminator]
VS [terminator]
PARAMETER RANGE
0 to 127.9099
DEFAULT VALUE
"VS 42;"
EXPLANATION
The VS command with no parameter sets the pen speed to the initial value, 42cm/sec. The
parameter range is 0 to 127.9999. A parameter of loss than 1 sets the speed to 1 cm/sec, or
more than 42 sets to 42cm/sec.
Reducing the pen speed with the VS command will allow the plotter to draw thick lines or clear
lines.
Also, the proper pen speed for a given pen can be set with this command. Refer to the following
table.
6,0
Origin point (6,0) after executing UC command
"UC0,2,99,0,4,6,0,0,2,3,-4,- 3, - 4 , 0 ,2 , - 6 ,0;"
COMMAND ***
"
"IN;SP1;PA3000,2600;"
ABC
Velocity Select
0,2 3 , - 4
Fig. UC-2
DEF
Fig. UC-3
3-65