Roland DXY-1300 Command Reference Manual page 69

140 LPRINT "DI-1,1;LB
150 LPRINT "DI -1,0;LB
160 LPRINT "DI-1,-1;LB
170 LPRINT "DI0,-1;LB
180 LPRINT "DI1,-1;LB
190 LPRINT "DI;LB
DP
• FORMAT
DP [terminator]
• EXPLANATION
Receiving the DP com m and, the plotter is set to the digitize mode and ready to digitize.
By pressing the ENTER
________ key, X and Y coordinate values of the current pen position and
pen up/down condition are stored in the plotter. At the same time, bit 2 of the status byte is
set and data of the digitized point are ready to be output. The DP command uses no
parameter. For details, refer to " 3.8 Digitize Com m ands" in CHAPTER 3. •
• EXAMPLE
10 ' *** "DP" COMMAND ***
20 OPEN "COM1:9600,N ,8,1" AS #1
30 PRINT #1,"DP;"
40 PRINT "Press ENTER key,
50 INPUT A
60 PRINT #1,"OD;"
70 INPT # 1 ,X,Y,P
80 PRINT "X =";X;"
90 PRINT #1,"DC;"
-- 135deg--
-- 180deg--
-- 225deg-
-- 270deg--
--315deg--"
--DI COMMAND--
Fig. DI-3
Digitize Point
Y =";Y ;"
3-25
CD
CD
— D I COMMAND—
(For serial connection only)
then press RETURN key."
U/D =";P