Installing Windows Drivers And Utilities Via An Ethernet Tcp/Ip Interface Configuration - MINOLTA-QMS Magicolor 6110 GN Installation Manual

3
When the installation application window appears, select Install
Printer Utility and Driver, and then follow the on-screen
instructions to install the printer driver and Crown Port Monitor.
Installing Windows Drivers and Utilities via an Ethernet
TCP/IP Interface Configuration
Detailed instructions for configuring TCP/IP can be found in the CrownBook
(in PDF format on the Software Utilities CD-ROM).
DHCP Installation
5 "
If you use DHCP to install TCP/IP, you must enable DHCP/WINS
in Administration/Communications/Resident NIC/CrownNet/TCPIP
printer configuration menu. See your network administrator and
your CrownBook for further information.
Manual TCP/IP Installation
1
Connect your printer to the network with an Ethernet cable.
2
If necessary, in the Administration/Communications/Resident NIC/
CrownNet/TCPIP/Internet Address menu, enter the printer's Internet
address.
The factory default Internet address is 161.33.128.24. If necessary,
in the Administration/Communications/Resident NIC/CrownNet/
Installing Printer Drivers and Software
33