Table of Contents
Advertisement
tray). The media pressure plate will automatically lock into position
when the media is loaded.
Attention
Improperly adjusted guides may cause poor print quality, media
jams, or printer damage.
3
Fan a stack of approximately
250 sheets of paper.
Make sure the paper corners
are not bent.
Attention
The paper should fit easily between the guides. Do not overfill
the tray. A fill limit mark is provided on the inside left side of the
tray. The standard upper media tray holds 250 sheets of 20 lb
bond (75 g/m²) paper.
4
Load the paper face-up with its top
toward the right of the cassette and
the long edge toward
the printer.
Often, an arrow on the media
package label indicates the
printing-side of the media.
5
Slide the media tray back into
the printer.
6
Print at least 20 pages to make
sure the toner in the new car-
tridges have settled properly.
For further information about loading and
using media, refer to chapter 2, "Using Media," in the User's Guide .
Accessories
Attention
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.
If you purchased any additional printer accessories, then install them now. If
installation instructions are included with the accessory, follow them. If not,
Accessories
19
Advertisement
Table of Contents
