Location Requirements
Top View
8 inches
(20 cm)
„
On a hard, flat, level (1.5° or less slant at any point around the
machine) surface capable of supporting the printer, accessories, con-
sumables, and media. Weights are shown below.
5 "
Component
Printer
Consumables (such as toner,
OPC belt)
Media
Lower feeder unit (each)
Duplex unit
„
In an area with an ambient temperature range of 50°–95° F (10°–
35° C) and relative humidity range of 20%–80% (noncondensating).
„
Away from cooling and heating sources, extreme temperature or
humidity changes, direct sunlight, excessive dust, corrosive chemicals
6
20 inches
(50 cm)
4 inches
015mati.eps
(10 cm)
A surface can be tested for levelness with a standard round
pencil. If the pencil rolls, the surface is not level. Clear the area
of any obstruction or items such as cables that might prevent
the printer from sitting directly on the flat, level surface.
Getting Acquainted with Your Printer
28 inches
(70 cm)
Weight
101 lbs (46 kg)
11 lbs (5.0 kg) (total)
5.2 lbs (1.9 kg) per ream of 20 lb
2
bond (75 g/m
) paper
14.8 lbs (6.7 kg)
5.3 lbs (2.4 kg)