Accessories And Consumables - MINOLTA-QMS Magicolor 6110 GN Installation Manual

Konica minolta magicolor 6110 gn: installation guide
Hide thumbs Also See for Magicolor 6110 GN:
Table of Contents

Advertisement

Accessories and Consumables

Refer to www.minolta-qms.com for part numbers and pricing.
Accessories
Description
BuzzBox
Cabinet
CGM
Color Calibration Kit
CrownNet for Ethernet 10BaseT/
100BaseTX Interface
CrownNet for Token-RIng
Interface
Crown for DECnet-TCP/IP
Interface
Dual In-Line Memory Modules
(DIMMs)
Duplex Unit
Envelope Feeder
Ethernet Interface
ImageServer
Internal IDE Hard Disk Drive
Kanji Font Internal IDE Hard
Disk Drive
LN03 Plus
LocalTalk Interface
Lower Feeder Unit (LFU)
Accessories and Consumables
Remark(s)
Via parallel connection for 100, 120, and
220 volts
Emulation
Equipped with RJ45 connector
Equipped with STP and UTP connectors
Equipped with 10BaseT
Additional memory must be 32, 64, or
128 MB, PC-100 Compliant SDRAM
DIMMs, up to a printer maximum of
384 MB (up to 128 MB for each DIMM
slot).
Installation of a duplex unit requires at
least one LFU be installed.
110 and 220 volt printers ship with an
envelope feeder; for use only in the
upper media tray
TIFF/CALS
Includes two Morisawa fonts,
and GothicBBB.
Emulation. Requires hard disk.
Equipped with LocalTalk for legacy Apple
environments
Media tray included (up to two can be
installed)
Ryumin
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magicolor 6110

Table of Contents