Table of Contents
Advertisement
Drivers/Utilities
UNIX Host
Software
Printer Utility for
the Macintosh
Installing Printer Drivers and Software
You can install printer drivers and utilities via a parallel or an Ethernet
connection.
Installing Windows Drivers and Utilities via a Parallel
Connection
Plug and Play Installation
5 "
Ethernet connections don't support Plug and Play technology. If you're
using an Ethernet network connection, skip to "Installing Windows
Drivers and Utilities via an Ethernet TCP/IP Interface Configuration"
on page 33.
1
Connect your printer to your PC with a parallel cable.
5 "
Under certain PC configurations, the Software Utilities CD-ROM auto-
matically launches its own installation utility. If this should occur during
the Plug and Play procedure, cancel the Plug and Play installation and
install the driver using the CD-ROM installer for easy access to color
management and online documentation.
2
With your PC turned off, turn on the printer (the power switch is on
the left side of the printer), and then turn on your PC. A Found New
Hardware message appears. Follow the directions for your operat-
ing system:
Windows Me/98/95
Insert the Software Utilities
CD-ROM.
Installing Printer Drivers and Software
Use/Benefit
UNIX Host Software, compatible with a variety of UNIX
platforms, allows for the customization of UNIX-based
queues and filters for the specific features of the Crown
printer.
This utility provides common management tasks for
Crown printers from a Macintosh platform, such as
naming the printer, configuring the printer, and down-
loading fonts.
Windows 2000
Select
~Search
31
Advertisement
Table of Contents
