Mounting Xv2-21X - Cambium Networks XE5-8 Hardware Installation Manual

Mounting XV2-21X

The XV2-21X units are mounted by using one of the following mounting techniques:
Ceiling mount,
⚫
Wall mounting, or
⚫
T-bar mounting.
⚫
Ceiling mount
To mount the XV2-21X unit by using the ceiling mount technique, perform the following steps:
1. Determine a place or location where you want to mount the XV2-21X unit.
2. Remove the ceiling tile.
3. Using the hole template, mark the hole locations.
4. Drill the holes for the four mounting screws using a 5mm (3/6") diameter drill bit.
5. Drill the RJ45 cable hole using a 15 mm (5/8") diameter bit.
Chapter 2: Packaging and Installation of Access Point 41