Image Alignment; Loading Media - Konica Minolta Magicolor 2350 EN User Manual

Image Alignment

If for any reason you need to change the image alignment, you can do so by
adjusting the margins or page size through your application,

Loading Media

How do I load media?
If you are using paper, remove the top
and bottom sheets from the ream.
Holding a stack of approximately 200
sheets, fan the stack to prevent static
buildup before inserting it in a tray.
Do not fan transparencies.
Attention
Although this printer was designed for printing on a wide range of
media types, it is not intended to print exclusively on a single media
type except plain paper. Continuous printing on media other than plain
paper (such as envelopes, labels, thick stock, or transparencies) may
adversely affect print quality or reduce engine life.
Do not mix media of different sizes, types, or weights, as this will cause
media jams.
When refilling media, first remove any media remaining in the tray. Stack it
with the new media, even the edges, then reload it.
When loading media, make sure the media size and type settings match.
30 Loading Media