Konica Minolta Magicolor 2350 EN User Manual page 107

3
Clean the feed rollers by wiping them
with a soft, damp cloth that has been
wrung out well.
4
Close the duplex option cover.
5
Plug in the printer; reconnect the
interface cable. and turn the printer
on.
In compliance with UL guide-
lines, "The appliance inlet is
considered to be the main disconnect device."
Tray 2 (Optional Lower Feeder Unit) Media Rollers
1
Turn off and unplug the printer and disconnect the interface cable.
2
Remove paper from Tray 2.
3
Remove the brackets (two at the front and one at the back) used to attach
the lower feeder unit to the printer.
Opening the front door and removing the waste toner bottle first
will permit a clearer view of these brackets.
WARNING!
Your printer weighs
installed. Be sure to have help when lifting and moving it.
Cleaning the Printer
approximately 62 lbs (28 kg) with consumables
105