Konica Minolta Magicolor 2350 EN User Manual page 79

8
Color Matching—If you see spots of toner around the edges of text, if
colors are too dark or too saturated, or if toner is so thick that it flakes off
the finished page, check whether Quick Color Configuration (on the
Features tab in your printer driver) is set to Disable Printer Color
Matching. If it is, choose one of the other options from the drop-down list.
All of the other color configuration options regulate the amount of toner
that goes on the page, making sure that the total amount is within the
range that the printer can fuse to the media.
9
SWOP CMYK—This sophisticated setting is used by graphic artists to
make sure the colors in their proofs match those that will be created by an
offset press.
If you are trying to simulate a SWOP device or the color data in your
file is specified in SWOP CMYK, make sure the simulation profile is
set to SWOP.
If you are not trying to simulate SWOP, make sure the simulation
profile is set to None or to whichever of the other choices is
appropriate for your job.
10
Other Color Problems—Most other color printing problems arise from
color management issues in the application that was used to create the
job or from which you are printing the job.
Check the application documentation for advice on color
management.
Check color notes at printer.konicaminolta.net/support for information
on color issues with popular publishing software.
Troubleshooting Color Problems
77