Solving Other Problems - Konica Minolta Magicolor 2350 EN User Manual

Symptom
Media is
jamming.

Solving Other Problems

Symptom
Printer power
is not on.
126
Cause
Multiple sheets of
transparency (OHP)
media are collecting
static electricity in the
tray.
The media is moist
from humidity.
Unsupported media
(wrong size,
thickness, type, etc.)
is being used.
Media supply roller is
dirty.
Cause
The power cord is not
correctly plugged into
the outlet.
Something is wrong
with the outlet you are
using for the printer.
The power switch is
not correctly turned
on (I position).
The printer is
connected to an outlet
with a voltage or
frequency that does
not match the printer
specifications.
Solution
Remove the transparencies and load
them in the tray one sheet at a time.
Do not fan large quantities of
transparencies before loading them.
Remove the moist media and replace it
with new, dry media.
Use media that is covered by the
printer warranty.
Clean the media supply roller.
For more details, refer to "Media
Rollers" on page 103.
Solution
Turn the power switch off (O position),
then remove the power cord from the
outlet and plug it back in.
Plug another electrical appliance into
the outlet and see whether it operates
properly.
Set the power switch to the off (O)
position, then set it back to the on (I)
position.
Use a power source with the
specifications listed in appendix A,
"Technical Specifications."
Solving Other Problems