Software Utilities Cd-Rom; Drivers And Utilities - Konica Minolta Magicolor 2350 EN User Manual

Software Utilities CD-ROM

If you followed all the steps in the Installation Guide that came with your
printer, then the printer is properly set up, connected to your computer,
plugged in, turned on, and ready to receive the system software, drivers, and
utilities on the Software Utilities CD-ROM.
Put the CD-ROM in your computer's CD-ROM drive and the AutoInstaller
begins the installation process.

Drivers and Utilities

The printer driver and additional software on the Software Utilities CD-ROM
can be installed on PC, Macintosh, and other computers using any of the
following:
Windows Me
Windows 98
Windows XP
Windows 2000
Windows NT4
Drivers and PPDs
Manual installation instructions and additional information are included
in the magicolor 2350 Reference Guide in case you need them.
Drivers
PostScript 2/3
Drivers
Windows XP/
2000
Windows
Me/98
Windows NT4
PCL6 Drivers
Windows XP
(1200 dpi)
Windows 2000
Windows
Me/98
8
Use/Benefit
These drivers give you
access to all of the
printer features,
including finishing and
advanced layout
PCL6 allows access to
most of the features on
the printer.
Macintosh OS 9 or X (version 10.1
or higher)
UNIX/Linux
NetWare (Versions 5 and 6)
NDPS
Installation Instructions
"Installing Printer Drivers and Utilities,
Windows Environments—Auto-loading
Installation" on page 12.
Readme on the Software Utilities CD-
ROM.
Software Utilities CD-ROM