Error Messages - Konica Minolta Magicolor 2350 EN User Manual

This message...
FIRMWARE UPDATE
READING IMAGE
FIRMWARE UPDATE
SELECTED
FIRMWARE UPDATE
WRITING IMAGE
INITIALIZING
MAGICOLOR 2350
IDLE
PRINTING
PROCESSING
STARTING SYSTEM
WARMING UP

Error Messages

This message...
AIDC ERROR
CANNOT ROTATE
CARTRIDGE
DISK ACCESS
ERROR (FILE TYPE)
DISK FULL
DISK NEAR FULL
Status, Error, and Service Messages
means...
The printer is reading a new
image for the flash firmware.
Acknowledges that the user
has requested an update.
The printer is writing a new
image to the flash firmware.
The printer is initializing.
The printer is on and ready
to receive data.
The printer is printing.
The printer is processing
data.
The printer is starting the
system firmware image.
The printer is warming up.
means...
AIDC sensor error.
The toner cartridge
carousel cannot turn.
The hard disk is full or
broken and
accounting data has
been lost.
The hard disk is full.
The hard disk is
nearly full.
do this...
No action needed.
do this...
Open and close the front
cover to clean the AIDC
parts.
Try again or continue
printing without
changing the cartridge, if
Quality/Toner Action/
Low is set to Continue.
Use the Cancel key to
release files temporarily.
Reformat or replace
hard disk.
Use the Cancel key to
release files temporarily;
reformat or replace the
hard disk.
Delete files or formatting
you no longer need.
141