Konica Minolta Magicolor 2350 EN User Manual page 156

3
Remove the duplex option from the
shipping carton.
4
Remove any tape from the duplex
unit.
We strongly suggest that you
save the packing materials in
case you ever need to move or
ship the printer.
5
Attach the duplex option to the printer.
a Hook the two tabs at the bottom of
the duplex option onto the
notches on the right side of the
printer.
b Push the duplex option towards
the printer until it clicks on top.
c While still supporting the duplex
unit, carefully open the right-side
door and check that the tabs on
the duplex option are correctly
hooked onto the printer.
Attention
If the duplex option is released before
it is secured with the screws, it may
fall and break. Be sure to keep the top
of the duplex option supported until
the screws are tightened.
154 Duplex Option