Adding An Eod Command To Your File - QMS 860 User Manual

Appendix F
SELECT
then NEXT
SELECT
ONLINE/
OFFLINE
NEXT
SELECT
ONLINE/
OFFLINE

Adding an EOD Command to Your File

When adding an EOD command to your file use the syntax for the
selected EOD command exactly as written (the command's syntax
is case sensitive).
NOTE: represents the escape character. (The decimal value for
F - 2 4
END JOB MODE
OPTION
PARALLEL (or
SERIAL)
END JOB MODE
SAVE CHANGES?
NO
SAVE CHANGES?
YES
IDLE
IDLE
the escape character is 027, and the hexadecimal value is
1B.) How you enter the escape character depends on
your application. Some applications allow you to press
and hold the ALT key and then type 027 to enter the
escape character, while others allow you to type certain
character sequences to represent the escape character.
A d d i t i o n a l T e c h n i c a l I n f o r m a t i o n
Access End Job Mode and
advances to the selected
End Job Mode option. OP-
TION is the End Job Mode
option you want (QMS
EOD, or
EOD, HP
NONE.
Returns to Parallel or Serial
/ End Job Mode.
Exits from the End Job
Mode menu and prompts
you to save changes.
Advances to the next save
changes option.
Saves the changes and re-
turns the printer to idle.
Turns on the indicator and
puts the printer back on
line.