Table of Contents
Advertisement
Load upto 50 transparencies at a time in the multipurpose
tray to avoid static buildup.
Keep the paper path clean. Transparencies are especially
sensitive to a dirty paper path; if there are shadows either
on the top or the bottom of the sheets, see the "Caring for
the Printer" section of this chapter for instructions on how
to clean the paper path.
Remove each transparency from the output tray before the
next sheet is printed to prevent jams or misfeeds.
Labels
Use only labels recommended for laser printers. (See appendix B,
the "Print Media" section, for label specifications.) Adhesive label
stock has pressure-sensitive (peel and stick) adhesive backing.
Always use the multipurpose tray to print labels.
Storing Labels
Storing labels improperly increases the chance of jams during
printing and can affect the print quality of your labels. Keep labels
in good condition by storing them
In their wrapper
On a flat surface
In a closed cabinet
Out of high temperature and humidity areas
Do not leave labels unwrapped or in a place where heat and
humidity can damage them.
D a i l y O p e r a t i o n s
Chapter 5
5 - 1 9
Advertisement
Table of Contents
