Chapter 5
OFFLINE/
ONLINE
NOTE: Make sure that the two paper cassettes installed in your
Clearing Media Jams
With most printers, if a jam occurs, you must remove the jammed
media and then reprint the job. However, the QMS 860 Print
System provides automatic jam recovery. If a media jam occurs,
remove the jammed media, and the printing automatically resumes
from the page the printer stopped at when the jam occurred.
NOTE: For automatic jam recovery to work, it is necessary to
5 - 2 2
IDLE
printer use the same size paper. Also, remember that the
printer must be off line to change printer configuration.
leave the printer turned on when you remove the jammed
media. After the jam is cleared, open and close the front
cover once before printing. Printing will not begin until
you do this.
Turns on the indicator and
puts the printer in a ready
state.
D a i l y O p e r a t i o n s