QMS 860 User Manual page 222

10. Replace the connector cover on the printer (fig. 8.6).
Fig. 8.6 Replace the Connector Cover
11. Reconnect the printer power cord and interface cables. Turn
on the printer. Replace the paper cassette you removed earlier
and install the second cassette as described in the "Dual Paper
Cassettes" section later in this chapter.
NOTE: When using the legal/B4 or 11" x 17"/A3 size paper
P r i n t e r O p t i o n s
cassette with the optional paper feeder, remember to
place the rear cassette covers on both cassettes, one at the
rear of the printer and the other at the rear of the paper
feeder.
Chapter 8
Connector Cover
8 - 9