Table of Contents
Advertisement
Chapter 9
commands may cause the printer to select the incorrect
emulation or to print the EOD command on your print job.
General Print Quality Problems
Print quality problems are those related to the appearance of the
pages you print. Print quality problems include white lines on the
page, uneven blacks, and other print distortions.
If you have problems with the quality of your printed pages, try this
quick check procedure:
1.
Check the print density adjustment dial on the inside of the
printer. Change the setting and try printing another page.
2.
If the TONER OUT message is on, replace the toner cartridge.
3.
Remove the toner cartridge and rotate it several times. The
toner can settle, and this procedure redistributes the toner.
Reinsert the cartridge and try printing again.
4.
Place a service call to your QMS vendor.
Specific Print Quality Problems
Listed below are several print quality problems with possible
solutions. Try the solutions in the sequence given. If the solutions
listed do not solve the problem, place a service call to your QMS
vendor.
9 - 1 6
T r o u b l e s h o o t i n g
Advertisement
Table of Contents
