Table of Contents
Advertisement
PostScript level set to Level 2. See chapter 4, the "Administration
/ Emulations / PostScript" section, for more information.
Multiple Pages Problem
If you are experiencing unexpected results when printing multiple
pages, try turning the collation feature off so that the memory used
for compressed pages can be released after it has been used. See
chapter 4, the "Operator Control / Collation" section, for more
information on collation.
Limit Check Error on a Macintosh
If a limit check error appears in the status box window when you
are printing a Macintosh file, then increase the PS Heap memory
client. See chapter 4, the "Administration / Memory" section, for
more information on PS Heap.
Emulation Error
If you receive an emulation error, you may need to increase the
amount of memory for the K Mem For Emulation memory client.
See chapter 4, the "Administration / Memory" section, for more
information on the Emulation memory client.
Binary Data Printing Problem
If binary data is not being interpreted correctly or if your binary
print job does not print, check that PS Protocol in the
Administration / Communications serial and parallel menus and
also in the Optional Network Interface menu (if installed) is set to
the Binary or Binary Fixed mode.
T r o u b l e s h o o t i n g
Chapter 9
9 - 1 3
Advertisement
Table of Contents
