Table of Contents
Advertisement
How to Format a Disk
After you have accessed the Administration/Disk Operations
menu, press the control panel keys in the order shown in the
following instructions to format a hard disk. The printer responds
by displaying a status message in the message window. You may
need to press the Next key one or more times to advance through
the list of selections or options. (The "#" symbol represents the disk
number).
NOTE: If the FORMAT FAILED message displays in the
Control
Panel Keys
SELECT
SELECT
SELECT
SELECT
P r i n t e r O p t i o n s
message window during the Format Disk operation, the
disk cannot be used. Press the Menu key to remove the
message and contact your QMS vendor.
Message Window
DISK OPERATIONS
FORMAT DISK
FORMAT DISK
DSK#:
FORMAT DISK
ARE YOU SURE
FORMAT DISK
FORMATTING...
FORMAT DISK
FORMAT COMPLETE
Chapter 8
Printer Response
Accesses Disk Operations /
Format Disk.
Advances through the list
of installed hard disks to
select the one to be format-
ted.
Accesses the selected disk
and displays a confirma-
tion message.
Displays formatting mes-
sage. While the system re-
boots, the hard disk is being
formatted.
Displays message when
format is complete. The
machine powers up and a
start-up page prints.
8 - 5 0
Advertisement
Table of Contents
