Komatsu PC138US-11 Operation & Maintenance Manual page 84

EXPLANATION OF COMPONENTS
On "Operator ID Input" screen LL (with SKIP), press switch
F1, and the screen changes to Check Before Starting
screen BB without inputting ID number.
REMARK
• Contact your Komatsu distributor for details of the method
of setting, changing, or canceling the operator identifica-
tion function.
• Depending on the set value of "Operator ID Holding Time
with Key OFF" for Operator ID Function Setting function,
even when operator ID of "Operator ID Setting" has been
inputted, "Operator ID Input" (with SKIP) screen LL or "Op-
erator ID Input" (without SKIP) MM screen may not be dis-
played when the starting switch is turned to ON position.
If inputting incorrect ID number for 3 times continuously, you cannot input ID number for 5 minutes. Wait for
more than 5 minutes, try inputting ID number again.
As long as "Operator ID Input" screen is displayed, the engine cannot be started. If you forget the ID number
and cannot start the engine, confirm the person in charge of the machine.
NOTICE
Since the purpose of the operator identification function is neither security enhancement nor a protec-
tion against theft, it has no anti-theft effect. Be careful not to use it for the purpose of security enhance-
ment.
Komatsu cannot accept any responsibility for any loss or damage resulting from the wrong use of ID or
unauthorized use of ID by a third person.
3-14
WENAM00111
OPERATION