Table of Contents
Advertisement
MACHINE OPERATIONS AND CONTROLS
Adjust the angle of the rear view camera so that people within
1 m away from the machine's rear part (W) appears in the ma-
chine monitor at the operator's seat.
If the image on the monitor is not aligned correctly, adjust
mounting angle (A) of the rear view camera in the following
procedure.
Angle (A) can be adjusted within the range from 30 to 60 °.
1.
Insert a flat-head screwdriver into hole (3) of bolt cover (2)
and remove bolt cover (2) while pressing the internal claw.
3-148
WENAM00111
OPERATION
Advertisement
Chapters
Table of Contents
