Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
CHECK MESSAGE
1.
On the standard screen, press switch F6.
When there is any message, message display (1) lights
up.
While message display (1) is lit, press switch F6, and the
mail confirmation menu (g) directly opens.
2.
Select the mail confirmation menu (g), and you can read
the received message.
3.
If a message requests reply, the Numeric Input: box (2) is
displayed at (g) of the mail confirmation menu. Make a re-
ply to the message.
REMARK
•
(3) is the subject of the received message. When no
message is received, "No message" is displayed in
place (3). is displayed.
•
(4) is the serial number of the received messages.
REPLY TO MESSAGE
1.
When replying to a message, input the selected item num-
ber in "Numeric Input" box (1) on the screen of mail confir-
mation menu (g). The selected item number is written in
place (2) of the message text.
•
Input the number by using the machine monitor
switch. Each switch corresponds to the numerical val-
ue shown on the lower right of the switch.
•
If you input an incorrect number, press switch F5, and
you can clear an input character at a time.
•
If switch F5 is pressed when the input column is blank,
the screen returns to the standard screen.
2.
After inputting a selected item number, press switch F6.
3.
When the message "Do you send Numeric Input?" is dis-
played in the column (1) of the mail confirmation menu
screen, press switch F6 again. When this message is dis-
played, press F6 switch again. The input value will be sent
out.
3-84
WENAM00111
OPERATION
Advertisement
Chapters
Table of Contents
