OPERATION
1.
If the mirror is removed, install it to the position shown in
the figure.
(E): 360 mm
(H): 15 °
If mirror does not move smoothly when adjusting its angle,
loosen mirror fixing screw (4) and mirror fixing bolt (5).
Tightening torque of screw (4): 3.0 to 3.5 Nm
2.
Check that you can see a person within 1 m away from
around the machine.
METHOD FOR ADJUSTING REAR VIEW CAMERA ANGLE
•
Before starting operation, always check the visibility of the camera. If it is improper, adjust it. If it is
not adjusted properly, you cannot secure the visibility and a serious personal injury or death may
result.
•
When adjusting the angle of the camera, prepare a scaffold first in order to provide a safe working
platform.
If you try to work standing on the counterweight, there is a danger of serious injury or death due to
falling off from the machine.
WARNING
k
WENAM00111
MACHINE OPERATIONS AND CONTROLS
3-147