Table of Contents
Advertisement
OPERATION
End screen when any message has been received
If there is any message from your Komatsu distributor, it is dis-
played on the end screen.
In this case, turn the starting switch to ON position to re-check
the message, and if it is the message requesting response,
send back your reply.
For the method of displaying and replying KOMTRAX messag-
es, see "MESSAGE DISPLAY (3-83)".
BASIC OPERATION OF MACHINE MONITOR WHEN STARTING SWITCH IS ON
WHILE OPERATOR ID INPUT IS SET
•
If "ID Number Input (with SKIP)" for "Operator ID Setting" is set, the opening screen GG switches to "Opera-
tor ID Input" (with SKIP) when the starting switch is turned to ON position.
•
If "ID Number Input (without SKIP)" for "Operator ID Setting" is set, the opening screen GG switches to
"Operator ID Input" (without SKIP) when the starting switch is turned to ON position.
•
On "Operator ID Input" (with SKIP) screen LL or "Operator
ID Input" (without SKIP) screen MM, input the already reg-
istered ID number, and press switch F6. The screen
changes to Check Before Starting screen BB. If you input
an incorrect ID number, press switch F5, and clear an in-
put character at a time.
WENAM00111
EXPLANATION OF COMPONENTS
3-13
Advertisement
Chapters
Table of Contents
