Table of Contents
Advertisement
OPERATION
2.
After removing the bottom window, store it at the rear of
the operator's cab and lock it securely with lock (2). The
procedure for stowing is as follows.
1)
Set it with the protruding part of grip (1) on the glass
on the inside and insert the bottom of the glass into
the groove in seat (3).
2)
Insert the top right of the glass into the groove in seat
(4).
3)
Set lock (2) to FREE position (F) and press the upper
side of the glass.
4)
Turn lock (2) 90° counterclockwise to LOCK position
(L) to fix the upper side of the glass.
NOTICE
When stowing the glass, lock it securely and
check that there is no play. If there is play or the
lock is not properly applied, there is danger that
the glass may fall.
5)
When removing the bottom window from the stowing
position, perform the stowing procedure in the reverse
order.
WENAM00111
EXPLANATION OF COMPONENTS
3-103
Advertisement
Chapters
Table of Contents
