OPERATION
2.
Remove bolts (4) (2 places).
3.
Remove cover (1).
4.
Loosen mounting bolts (5) (3 places) of the camera, and
adjust camera installing angle (A) so that the side of cam-
era matches the edge of bracket (B).
5.
After adjusting, tighten bolts (5).
Tightening torque: 11.8 to 14.7 Nm
REMARK
A part of the machine is shown on the monitor screen.
6.
Install covers (1) and (2).
MACHINE OPERATIONS AND CONTROLS
WENAM00111
3-149