Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
•
When you press switch F6 after inputting the ID which
is not registered to the "Operator ID Change" screen,
a message is displayed below and the screen returns
to the "Monitor Setting" menu screen.
In this case, the identified ID is not changed.
•
On the "Operator ID Change" screen, if no switch is
operated for more than 30 seconds, the screen auto-
matically changes to the "Monitor Setting" menu
screen.
In this case, the identified ID is not changed.
WHEN OPERATOR IDENTIFICATION FUNCTION IS AVAILABLE WITHOUT SKIP
When the operator identification function is available without
SKIP, the identified ID number is not displayed in the "Operator
ID" column of "Monitor Setting" screen.
1.
Select "Operator ID" (5) on the "Monitor Setting" menu
screen, then press switch F6 for 1 second.
2.
The "Operator ID Change" screen is displayed.
•
Input the already registered ID on the "Operator ID
Change" screen and press F6. Then, the identified ID
can be changed.
A message is displayed below and the screen returns
to the "Monitor Setting" menu screen.
3-82
WENAM00111
OPERATION
Advertisement
Chapters
Table of Contents
