Removing An Ir Or Anti-Aliasing Filter; Inserting A Filter - Kodak DCS Pro Back Plus User Manual

About the DCS Pro Back Plus

Removing an IR or Anti-aliasing Filter

CAUTION:
The Anti-aliasing filter and IR filter are fragile
devices and must be handled with care.
Slide the Filter latch to the right, then carefully
remove the filter.
Store the unused filter in the pocket of the
"
included body cap
Back
Contents
(page 79).
Next

Inserting a Filter

1 Insert the two tabs at the bottom of the filter
into the slots on the DCS Pro Back Plus.
2 Gently press the top of the filter into place until
it is latched.
Index
21