Conserving Batteries; Battery Save State - Kodak DCS Pro Back Plus User Manual

Using the Camera in Portable Mode

Conserving Batteries

To extend the life of the battery pack, keep the
following in mind:
Follow the instructions you received with
!
your compatible third party battery for its
care and use.
Older batteries may not last as long as
!
newer batteries.
Minimize use of the Image LCD and turn it
!
off when not in use.
You may be able to obtain information about
"
the battery's charge level from lights on the
battery pack. This information is not provided
on the DCS Pro Back Plus.
Contents Back

Battery Save State

To conserve the battery's charge, the DCS Pro
Back Plus enters Battery Save state if no DCS
Pro Back Plus controls are touched for a
specified period of time. When this happens, the
Camera Ready LED is extinguished, and the
Image LCD and DCS Pro Back Plus buttons
become inactive.
The default onset of Battery Save state is 60
minutes. You can change the Battery Save Onset
time in Properties
To Exit Battery Save State
Press the Power button.
The DCS Pro Back Plus turns on with the same
settings it had before Battery Save state began.
Next Index
(page 51).
63