Updating Firmware - Kodak DCS Pro Back Plus User Manual

Caring for Your DCS Pro Back Plus

Updating Firmware

1 On a computer with Internet access, go to
www.kodak.com, then choose Service and
Support. Choose Cameras, Digital from the
Professional Photography list, choose DCS
Pro Back Plus, then choose Firmware and
Host Software.
2 Download the firmware to your computer.
3 Insert a CF Card into the card reader attached
to your computer.
4 On the computer, copy the firmware file to the
card's root directory.
IMPORTANT:
The firmware can be updated only from the
card's root directory.
5 Insert the CF Card
Back Plus.
Contents Back
(page 43) in the DCS Pro
Next
Highlight the Menu icon
6
choose Main Menu from the drop-down menu
(page 25).
7 Choose Firmware from the Main menu.
8 Choose Update from Card from the Firmware
menu.
A confirmation screen appears.
Press the OK or Cancel button.
9
If you press OK, approximately fifteen seconds
pass. A progress screen appears while the
firmware is updating.
The camera automatically restarts after the
"
firmware is updated.
Index
(page 24), and
82