Using The Camera In Portable Mode; Getting Started - Kodak DCS Pro Back Plus User Manual

Using the Camera in Portable Mode

Getting Started

Using the Camera in Portable Mode
To start using your camera in portable mode (not
connected to a computer), do the following:
1 Assemble the camera
2 Connect a power supply
3 Insert one or two CF Cards
Turn the camera on
4
5 Capture images.
Review the images
6
Display LCD (or enable the video output
(page 86) to view them on a monitor.)
Contents Back
(page 33).
(page 61).
(page 42).
(page 62).
(page 68) on the Image
Next
7 Remove the CF Cards from the camera and
insert them in a card reader.
8 Copy the image files to the computer.
If images are copied to a computer
running DCS Capture Studio or DCS Photo
Desk software, you can access them using the
software.
Alternatively, you can copy them to a server
accessible from a computer running the DCS
Capture Studio or DCS Photo Desk software.
9 Edit the images, as needed, in the DCS
Capture Studio or DCS Photo Desk software
and save them in the desired format.
Index
(page 12)
60