Removing An Ir Or Anti-Aliasing Filter; Inserting A Filter - Kodak 645 User Manual

About the DCS 645

Removing an IR or Anti-aliasing Filter

CAUTION:
The Anti-aliasing filter and IR filter are fragile
devices and must be handled with care.
Place a fingernail in the groove at the side
of the filter, and carefully remove the filter.
Back
Contents

Inserting a Filter

1
2
Next Index
Insert the two tabs at the left side of the filter
into the slots on the DCS 645.
Gently press the right side of the filter into
place until it is latched.
Store the unused filter in the pocket of the
included body cap (page 111).
40