Using The Camera Connected To A Computer; Getting Started - Kodak DCS Pro Back Plus User Manual

Before You Begin

Using the Camera Connected to a Computer

Getting Started

Using the Camera Connected to a Computer
To start using your camera connected to a
computer, do the following.
It is not necessary to turn the computer off.
"
1 Assemble the camera
2 Install the included DCS Capture Studio, DCS
Camera Manager, and DCS Photo Desk
software. (Follow the instructions on the
software CDs.)
Connect the camera to the computer and
3
power supply (page
4 Turn the computer on, if it isn't already.
The Power button has no effect when the
"
camera is connected to a computer.
Contents Back
(page 33).
55).
Next
5 Start the Capture Studio software or Camera
Manager software.
6 Capture images.
7 Review and edit the images, as needed, in the
DCS Capture Studio or DCS Photo Desk
software and save them to the computer's
hard drive in the desired format.
Index 54